Skip to main content
725 BRANCH AVENUE PROVIDENCE RHODE ISLAND          401-331-6610

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Tools

$144.95
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. This new tool has included options for QR and thru axle. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle and 5mm quick release bikes
$119.95
The Pack Hanger Alignment Tool allows quick adjustments to be made to the derailleur hanger while on the trail or in the workshop. Alignment fixes are quick and intuitive, as you only need to adjust the hanger handle until it is parallel with the indicator rod. By using the bike's axle for reference, you don't need to be concerned with the wheel for making adjustments to the hanger. And for simple and durable storage, the components of this tool also nest inside of the handle. - Quick, easy deployment at the trailhead or workshop with all components ready to go inside the handle. - Tightening knob employs a clever rock-to-lock thread engagement that saves time while installing and removing. - Alignment is made by a simple, intuitive process of lining up the handle to the indicator rod. No turning the wheel or dodging spokes required. - Works on 12mm thru axle bikes
$44.95
This ultralight hex and bottom bracket wrench has a 1-inch hex at one end and an external BB cup spline at the other end. The 1-inch hex end features magnets that quickly couple with Wolf Tooth's steel hex insert tools. - 1-inch hex drive at one end and 16-notch 44mm bottom bracket tool (or centerlock rotor tool) at the other end - Includes the wrench only. Steel inserts are not included but can be purchased separately - 1-inch hex drive interface compatible. Magnets inset allow quick coupling and decoupling of steel inserts
$29.95
Flat wrench inserts from Wolf Tooth turn your flat wrench into many other tools. - All inserts are 1 inch hex drive interface compatible - Design and manufactured in Minneapolis, MN USA - Nickel plated 4140 chromoly steel
$11.95
Resolve Dropper Post Rebuild Kit includes refill fluid, graduated cylinder, and 10 travel adjustment spacers.
$49.95
The Tool Wrap was designed to make trailside repairs quick and efficient. Featuring multiple flaps that allow you hang it from a wall, act as a changing area foot pad and more, the Tool Wrap is the perfect trailhead companion. - Top flap that can be shut in a car door for a mobile workshop - Bottom flap provides a work space to keep your parts and tools out of the dirt when working on the ground - Pocket layout is ideal for all the tools you need to build a bike - Aluminum eyelets for hanging up in your home or work shop - Dimensions: 68 by 46 cm (main body), 60 by 20 cm top flap (for car door), 32 by 60 cm bottom flap (work space), rolled up diameter size varies
$9.99
White Lightning's Easy Clean Tire Brush is the perfect solution for cleaning dirty tires. It removes tread grit, which improves traction, helps to prevent flats, and minimizes the mess when storing or transporting your bike. The adjustable Easy Clean Tire Brush fits every shape and size of tire. You can also use it wet or dry, whether you just need to knock some dirt off or really get in there and give 'er a good scrubbing.
$40.00
- Anti-Loosening, Anti-Corrosion thread prep with PTFE - Two colors offer coating for different spoke lengths
$9.50
Our 2437 open bore adapter is used to press 24x37 sealed bearings into bottom bracket cups, and direct fit frames like trek BB90. The adapter is machined with one step at 24mm ID, which fits into the center of the sealed bearing. - Installs: 24x37 bearing - Inner step outer diameter: 23. 8mm - Outer diameter: 36. 8mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible with BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)
$35.00
Sealed bearing extractor for 29mm ID bearings. Extractor has 1/2" thru hole for use with our 1/2" threaded rod press handles. - This extractor is part of a system that requires additional pieces to function.
$9.50
This 29mm open bore adapter is used to press 29mm x 42mm (DUB) sealed bearings. The adapter is machined with one step at 29mm OD, which fits into the center of the sealed bearing. For use with Wheels Mfg. bottom bracket press (PRESS-7 , PRESS-7-PRO or PRESS-9-PRO). - Inner step outer diameter: 28.9mm - Outer diameter: 41.8mm - Thru hole diameter: 12.8mm (1/2-inch) - Thickness: 7mm - Machined, red anodized aluminum - Sold individually
$23.63
Receiver cup for Wheels Mfg. sealed bearing extractors. Machined aluminum cup, anodized red with 60mm OD and 52mm ID. - 1/2-inch thru hole to fit over Wheels Mfg. 1/2-inch threaded rod press handles - This receiver cup is part of a system that requires additional pieces to function
$9.50
Our 6806 open bore adapter is used to press 42x30 sealed bearings. The adapter is machined with one step at 30mm ID, which fits into the center of the sealed bearing. Common bearing size for BB30 frames and bottom brackets. - Installs: 6806 bearing - Inner step outer diameter: 29. 9mm - Outer diameter: 41. 8mm - Thickness: 7mm - Thru hole diameter: 0. 387" (9. 8mm) - Inner hole sized to fit 1/2" threaded rod - Compatible BP0006, BP0007 - Machined, red anodized aluminum - Sold individually (2 drifts required for some installations)
$125.00
- Bottom bracket and bearing installation kit - (1) 1/2" rod, (2) threaded handles - (1) 2237 OPEN BORE, (2) 2437 OPEN BORE, (2) 29mm OPEN BORE, (2) 6806 OPEN BORE, (1) FRAME DRIFT
$170.00
- Essential bottom bracket bearing extractor set - (1) 6806 extractor, (1) 24x37 extractor, (1) 29 DUB extractor, (1) 22mm GXP extractor
$47.25
BB30 service kit for SRAM DUB cranks. - Includes (2) Enduro 6806/29 ABEC-3 sealed bearings and 2 retaining clips - Bearing Dimensions: OD: 42mm / ID: 29mm / Width: 7mm - Enduro ABEC-3 bearings - Use with SRAM DUB cranks Note: SRAM DUB cranksets are not designed to work in 68mm or 73mm wide shells with inboard bearings. Use only if your frame is a direct-fit bearing system, and the BB shell width is 86.5mm or wider.
$229.00
Precision-machined anodized aluminum clamps designed to allow for easy and secure clamping of round suspension components during service. Designed by Barnett Bicycle Institute and manufactured by Wheels Manufacturing. Kit includes 3 pairs of shaft clamps to fit 15 shaft diameters from 8mm to 28.6mm For use with: - Suspension damper shafts - Suspension damper cylinders - Suspension air-spring cylinders - Suspension piston shafts - Thru-axles Clamp 10-006 fits - 8mm - 9mm - 10mm - 12.7 - 15mm - 15.9mm - 16.7mm Clamp 10-007 fits - 17.5mm - 18.7mm - 19.5mm - 21mm - 22.2mm Clamp 10-008 fits - 23.8mm - 25.4mm - 28.6mm
$35.00
- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.
$35.00
- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.
$75.00
- Essential bearing press for installation of bearings with a 10mm minimum ID - (1) 3/8 ACME threaded rod, (2) 30mm standoffs, (2) threaded handles
$39.50
- Machined to match manufacturer specifications and designed to be used with a ½” drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.
$47.00
- Machined to match manufacturer specifications and designed to be used with a 1/2" drive socket or torque wrench for easy installation and removal of e-bike lockrings. - Precision machined aluminum body. - Anodized in Wheels MFG red.
$22.05
Receiver cup sleeve for Wheels Mfg. sealed bearing extractors. Machined aluminum sleeve, anodized red. - 1/2-inch thru hole to fit over their 1/2-inch threaded rod press handles - Part of a system that requires additional pieces to function
$18.50
Designed to press in all current wheels mfg bottom brackets! our universal bottom bracket frame drift is designed to press all current wheels mfg bottom bracket cups in to your frame. The adapter is machined with multiple steps to fit common bottom bracket shell inside diameters listed in the compatibility tab below. Each step is laser etched with the diameter size. Drift can also can be used as a frame bottom bracket shell sizing guide! - Inner hole sized to fit 1/2" threaded rod. (Not for use with our Press-1 or Press-4 ) - Compatible with any other press with a 1/2" diameter rod - Recommended for use with Wheels Mfg BP0006, BP0007 - Machined aluminum - Anodized red - Sold individually We do not recommend it for use with press with a rod diameter less than 1/2". When used with a smaller rod, it is almost impossible to prevent the cups or bearings from pressing in straight.
$26.25
The Bottom Bracket Gauge Tool was designed to provide all the necessary measurements to identify the proper bottom bracket for a specific bike configuration. A metric scale runs along the long edges for measuring bottom bracket shell width and crank spindle lengths. Durable red anodized aluminum with laser etching. Overall size is 7" x 3" x 0.125". The gauge can measure: - bottom bracket width - bottom bracket shell inner diameter - crank spindle length - crank spindle diameter - bearing inner diameter Specifications: Measures crank spindle diameters: 22mm, 24mm, 29mm, 30mm Measures bearing inner diameters: 22mm, 24mm, 29mm, 30mm Measures bottom bracket shell inner diameters: 37mm, 41mm, 42mm, 46mm Measures bottom bracket shell widths: 61mm, 68mm, 73mm, 79mm, 86.5mm, 90mm, 92mm, 95mm, 100mm, 120mm, and 132mm Measures crank spindle lengths up to 180mm
$211.00
Complete tool kit for installing wheels manufacturing bottom brackets. Kit includes our new bottom bracket socket tool for installing our BB cups, along with new sealed bearing drifts for the following ID bearings: - 22mm - 24mm - 29mm - 30mm Bottom bracket press pro install kit includes: - UNC 48mm 16-notch socket x 1 - 22x37 drift 1/2" x 1 - 6806 OB 1/2" x 2 - 24x37 OB 1/2" x2 - 1/2" frame drift x 1 1/2-13 x 9. 7" - threaded rod unc x 1 44-48. 5mm - double 16-notch 1/2" socket x 1 - threaded handle x 2
$62.50
Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red
$39.00
This Wheels Mfg. Double End Bottom Bracket wrench fits 16-notch bearing cups with an outside diameter of 44mm as well as 16-notch bearing cups with an outside diameter of 48.5mm. - Machined aluminum - Anodized red. - Compatible with all current Wheels Mfg bottom brackets with notched cups
$204.00
- Drift and over axle set for common thru axle hube and frame bearings - For use with 3/8" press rod - See wheelsmfg.com for full list of contents
$197.00
- Drift and over axle set for less common thru axle hube and frame bearings - For use with 3/8" press rod - See wheelsmfg.com for full list of contents