Filter By:
- Lubes/Cleaners (214)
- Tools (1027)
- Workstands (57)
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Tools/Maintenance

$8.99 - $147.15
$8.99 - $147.15
Up to 3% Off
Tri-Flow Superior Lubricant is a light viscosity lube that allows for deep penetration into hard to reach moving parts.
- Ideal for all conditions - wet, dry, road and trail
- High grade petroleum oils provide optimum lubrication under extreme temperatures (-60 to 475F) and humidity

$8.99
Tri-Flow Superior Dry Lubricant was specifically designed to lubricate like an oil and stay clean like a wax. Its exclusive formula includes paraffin wax and high grade petroleum oil which penetrates as it quickly sets up and dries, leaving a thin, visible, coating that repels water as it lubricates.
- Specifically designed for lubricating chains
- Applicator is not included or needed because of the product's consistency

$11.00 - $34.99
Shimano Hydraulic Disc Brake Fluid
- Non-corrosive mineral oil that offers excellent heat expansion properties
- Mineral oil will not absorb water from the air
- Not caustic and is non-toxic

$16.00
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide.
AWS-3 FEATURES
- 2mm, 2.5mm, and 3mm hex set
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit

$169.99
The BKM-1 Hydraulic Brake Bleed Kit will bleed most models of mineral-oil-based hydraulic brakes. Hydraulic systems need bleeding to remove any air bubbles and to inject new, clean fluid.
- Designed and built for home use and for the rigors of daily commercial use
- Includes two syringes, hoses with shutoff clips, multi-size bleed blocks, bleed funnel and a unique attachable syringe mount
- Housed in a rugged reusable case
- Machined 7075 aluminum fittings to service Shimano, Magura, Clarks, Promax, Tektro, TRP and other brands of mineral-oil-based hydraulic brake systems
- Replacement parts available
- Brake fluid not included

$22.99
Park's Hydraulic Brake Piston Press is used to set or reset the piston(s) inside hydraulic disc brake calipers during installation, maintenance and repair. Just push it into the caliper to wedge the piston into place. It's made of tough tool steel with a comfortable and oversize rubber handle for a great grip.

$33.95
Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.

$25.00
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.

$29.95
Park's Needle Nose Pliers are professional quality, 6-inches long, and made from forged, heat-treated chromoly steel. For ease of use they have a hidden spring, cutting jaws and 5 different gripping and crimping areas. Plus, they have soft-touch, dual-density handles for an excellent grip.

$24.99
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

$10.00
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.

$9.14 - $25.08
Everyone wears out their Park Tool work stand clamp covers at some point. Find replacement covers for yours here. Each cover is constructed of soft, durable composite rubber. See below to determine which covers fit your Park Tool stand clamp:
- 1002: fits 100-3X and 100-5X extreme range clamps
- 1185: fits clamps on the repair stands PCS-9, PCS-10, PCS-11, and PCS-12
- 1259: fits 100-4X, 100-6X, 100-7X, and 100-15X clamps
- 1960: fits 100-3D, 100-5D, and 100-25D Professional Micro Adjust Repair Stand Clamps
- 468B: fits clamps with double cable reliefs, including 100-3C, 100-5C, 100-8C, 100-8Y, and 100-9C clamps
- 467B: fits clamps with single cable relief, including PRS-2 through PRS-8 (for older-style clamps, non-current)
- 468G: fits PCS-1 and PCS-2 clamps with double cable reliefs (clamp models: 100-1C, 100-1CA, and 100-2C)
- 467G: fits PCS-1 and PCS-2 clamps with single cable relief (for older PCS-series stands only; not for current model stands)
- 466: Rubber Replacement Clamp Cover Set (fits older clamps with plastic-dipped jaws)

$9.95 - $10.00
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.

$5.95 - $10.00
Park's Shop Screwdrivers are pro-quality tools featuring durable and precise heat-treated chrome-vanadium tips and shafts and dual-density handles for an excellent grip.

$8.49 - $11.99
$9.99 - $11.99
Up to 15% Off
Park's professional-quality, precision-sized spoke wrenches are hardened and chrome plated for long service. Wrenches are vinyl coated in one of four colors indicating the size at a glance. You will find these wrenches in virtually every professional bike shop and every shop mechanic's personal tool stash. Make sure you have the sizes you need in your home toolbox and bike bag.

$6.99
• Updated to be stronger, smoother, and more versatile
• Features a new material and redesigned tip for easier entry into just about any tire, including tubeless
• The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed
• This set includes 3 tire levers

$11.99
• Updated to fit better in the hand with a more rounded, smoother shape
• The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market
• Nickel plated for years of service
• Designed for the home mechanic.
FIts the following size spoke nipples:
• .127" (3.23mm)
• .130" (3.30mm)
• .136" (3.45mm)

$57.75
- Includes everything for a quick fix while on or off-road
- Giant seat bag
- 12 glueless patches
- 2 tire levers
- Mini pump
- 9 function multi-tool

$10.00
Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.

$13.00
Zipp's Bearing Grease is perfect for your home workshop and traveling toolbox, too. It's a quality lubricant designed to minimize friction and maximize the life of your components. And it's easy to apply with its 20ml syringe container.

$7.00
Zipp Speed Weaponry Valve Extender Wrench Set
- Two 4 mm and 5 mm combination wrenches
- Replacement wrenches required to properly install Zipp integrated valve extenders
- Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender

$69.95
8-Bit System is a multi-function tool that regroups all potential needs in the field
-01 and -02 : 8-Bit Multi-tool plier offer 17 functions:
- Master link plier
- Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits
- Includes a tool for clearing tubeless valve stems and a spoke wrench
- Storage for one set of quick links
-03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on
- Chain breaker
- L key has a 3mm hex forked tire plug insert
- Utility knife
- Attach to 8-bit plier with magnets and short pins
- Items for internal storage are sold separately
-04 : 8-Bit Tire Lever + Rim Dent Remover add-on
- Tire lever
- Aluminum rim dent remover is designed for use with alloy rims
- Attach to 8-bit plier with magnets and short pins
-05 : Complete Kit Including Plier and both add-on

$139.95
8-Bit System is a multi-fonction tools that regroup all potential needs in the field
-01 and -02 : 8-Bit Multi-tool plier offer 17 functions:
- Master link plier
- Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits
- Includes a tool for clearing tubeless valve stems and a spoke wrench
- Storage for one set of quick links
-03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on
- Chain breaker
- L key has a 3mm hex forked tire plug insert
- Utility knife
- Attach to 8-bit plier with magnets and short pins
- Items for internal storage are sold separately
-04 : 8-Bit Tire Lever + Rim Dent Remover add-on
- Tire lever
- Aluminum rim dent remover is designed for use with alloy rims
- Attach to 8-bit plier with magnets and short pins
-05 : Complete Kit Including Plier and both add-on

$69.95
The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead.
- 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut
- Magnets keep all bits in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar for extra torque when head is bent
- 8mm hex bit tested to over 40 Nm torque
- Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains)
- Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

$19.95
8-Bit System is a multi-fonction tools that regroup all potential needs in the field
-01 and -02 : 8-Bit Multi-tool plier offer 17 functions:
- Master link plier
- Valve core wrench; Torx T10 and T25; flat head #3.5; Phillips #2; and hex 2, 2.5, 3, 4, 5,6 and 8mm bits
- Includes a tool for clearing tubeless valve stems and a spoke wrench
- Storage for one set of quick links
-03 : 8-Bit Chainbreaker + Utility Knife Multi-Tool add-on
- Chain breaker
- L key has a 3mm hex forked tire plug insert
- Utility knife
- Attach to 8-bit plier with magnets and short pins
- Items for internal storage are sold separately
-04 : 8-Bit Tire Lever + Rim Dent Remover add-on
- Tire lever
- Aluminum rim dent remover is designed for use with alloy rims
- Attach to 8-bit plier with magnets and short pins
-05 : Complete Kit Including Plier and both add-on

$44.95
This lightweight chainwhip is strong enough to be your go to chainwhip, but light enough that you won't need to leave it at home when on the move.
- Compatible with any cassette up to and including 12 speed cassettes
- Design and manufactured in Minneapolis, MN USA
- 7075-T6 Aluminum

$19.95
This adapter tool alows for installation of the crown race without damaging seals. It is compatible with the Park Tool CRS-15.2 crown race setting tube. Internal o-ring retains this adapter on the setting tube during use and storage. CNC machined from aircraft grade aluminum billet.
- Fits Park Tool CRS-15.2 crown race setting tube
- Design and manufactured in Minneapolis, MN USA
- Material - aircraft grade aluminum

$119.95
In-bike storage and essential riding tools that can meet the needs of almost any trailside repair. Durable, flexible storage sleeves make for a secure, clean place to stow EnCase System tools or other small items. Fits most mountain bars and most road bars thanks to a storage sleeve with a customizable rubber flap that can be cut to meet your handlebar inner diameter.
- 14 functions (spoke wrench; valve core wrench; flat head #3.5; Phillips #2; 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm, and 8mm hex; and T10, T25, and T30 Torx)
- Magnets & O-rings keep all parts in place
- Ball detent swivel head helps access hard-to-reach places
- Handle doubles as breaker bar when ball detent swivel head is bent for extra torque
- Store in handlebar with a Wolf Tooth EnCase Storage Sleeve (included)
- Magnet on bottom end of tool allows for storage on steel bike stands (or refrigerators)
- Fits most standard mountain handlebars and most drop bars (except ergonomic drop bars that have hard angles in the drops)
- Chain & Tire Plug tool compatible with all bicycle chains including 12-speed
- Inserter tool and bacon strips plug holes in tubeless tires
- Five strips included; refills available
- Hardened steel pin for lifetime durability
- Requires 4mm hex for chain tool driver which can be found on the EnCase Hex Bit Wrench
- Storage sleeves made of vibration-damping material and snug fit prevents rattling
- Durable precision-machined aluminum end caps
- Custom fit rubber flap can be trimmed to fit in smaller diameter bars
- Bonus storage space—fits a Presta-to-Schrader adapter and valve core or a master link (both sold separately)
- Includes Drop Bar Fit Kit to customize fit for larger-diameter road handlebars
Page 1 of 44
Next page